Table of Contents
Advertisement
Quick Links
6325-93110 (003)
OWNER / OPERATOR MANUAL
PORTABLE GAS DRILL
EDG2300
(NOTE: Drill is optional part.)
Thank you for purchasing a RedMax
WARNING
product.
The engine exhaust from this product
Before using our portable gas drill,
contains chemicals known to the State
please read this manual carefully to
of California to cause cancer, birth
understand the proper use of your unit.
defects or other reproductive harm.
APPLICABLE SERIAL NUMBERS :
901112 and up
Advertisement
Table of Contents
Related Manuals for RedMax EDG2300
Summary of Contents for RedMax EDG2300
- Page 1 6325-93110 (003) OWNER / OPERATOR MANUAL PORTABLE GAS DRILL EDG2300 (NOTE: Drill is optional part.) Thank you for purchasing a RedMax WARNING product. The engine exhaust from this product Before using our portable gas drill, contains chemicals known to the State...
-
Page 2: Safety First
Read this manual carefully to understand all safety precautions, controls, proper operation and maintenance of your RedMax portable gas drill. Failure to do so could result in serious injury. Instructions contained in warnings within this manual marked with a concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail. -
Page 3: Table Of Contents
SAFETY PRECAUTIONS ... 4 IN ORDER TO ENSURE PROPER AND SAFE OPERATION OF YOUR PORTABLE GAS DRILL WORK GEAR AND CLOTHING WARNINGS CONSIDERING HANDLING OF FUEL THINGS TO CHECK BEFORE USING YOUR PORTABLE GAS DRILL THINGS TO CHECK BEFORE STARTING UP THE ENGINE... -
Page 4: Safety Precautions
3. During rain storms, during lightning... -
Page 5: Work Gear And Clothing
• When using your portable gas drill for an extended period of time, you should wear ear protectors to protect yourself from loss of hearing from overexposure to high levels of sound. -
Page 6: Things To Check Before Using Your Portable Gas Drill
(15m) of the person using the portable gas drill should be considered a hazardous area into which no one should enter while the portable gas drill is in use, and when necessary yellow warning rope, warning signs, or some other form of warnings should be placed around the perimeter of the area. - Page 7 Safety Precautions Things to be careful about when using your portable gas drill • When using your portable gas drill, grip the handles of the portable gas drill firmly with both hands, place your feet slightly apart (slightly further apart than the width...
-
Page 8: Notes On Care And Maintenance Of Your Portable Gas Drill
• When replacing drills or any other parts or when replacing the oil or any lubricants, always be sure to use only RedMax products or products which have been certified by RedMax for use with the portable gas drill. -
Page 9: Parts Location & Specifications
Carburetor Ignition System Spark Plug Starting Stopping Standard Accessory Setup 1. Attach the grip and the drill chuck to the power unit securely by hand. 2. Insert the drill into the chuck, and tighten firmly. Muffer Spark plug Fuel cap... -
Page 10: Fuel
3m(10ft) away from the fueling stop before starting the engine. • The RedMax engines are lubricated by oil specially formulated for air-cooled 2-cycle gasoline engine use. If RedMax oil is not available. Use an anti-oxidant added quality oil expressly labeled for air-cooled 2-cycle engine use. -
Page 11: Operation
Choke lever CLOSE • Keep the drill clear of everything around it as they will start moving with OPEN the engine start. 7. Pull the throttle lever slightly, and it will be Overflow pipe unlocked automatically. -
Page 12: Stopping Engine
Boring operation • Keep the engine running at full throttle during operation. • Keep the drill going straight. Tilted boring can cause the drill to bend. • Avoid touching the spark plug lead during operation. Adjustment of Idling Speed •... -
Page 13: Maintenance
Maintenance WARNING • Before cleaning, inspecting or repairing your unit, make sure that engine has stopped and is cool. Disconnect the spark plug terminal to avoid accidental engine starts. Daily Inspection • Remove grass or dust, from the entire body. •... -
Page 14: Storage
2 cycle oil into the cylinder. Crank the engine several times and replace the plug. Pull starter until compression is felt. • Brush off dirt from the drill surface and apply rust protective oil. • Store the machine in a dry, dust-free place. -
Page 15: Parts List
Parts List PORTABLE GAS DRILL EDG2300 NOTE : 1. Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company. - Page 16 Parts List : EDG2300 Fig.1 DRIVE UNIT and TOOLS (S/N 901112 and up)
- Page 17 EDG2300 Fig.1 DRIVE UNIT and TOOLS Key# Part Number Description 3871-21100 Right handle comp. 3871-21120 • Grip 3871-21320 Stay 3545-14240 Bolt 01641-21423 Washer 3524-14400 Lever, Throttle 0280-10504 01601-20513 Washer 0263-30516 Screw 0280-10504 3872-21510 Bracket, Right 3871-21200 Left handle comp. 3541-14221 •...
- Page 18 Parts List : EDG2300 Fig.2 ENGINE UNIT (S/N 901112 and up)
- Page 19 EDG2300 Fig.2 ENGINE UNIT Key# Part Number Description 5602-12110 CYLINDER 5500-12212 GASKET, base 1850-12130 BOLT M5x12 5500-13162 INSULATOR 5500-13121 GASKET, INSULATOR 5500-13131 GASKET, CARB 0263-90520 SCREW M5x20 5602-15100 MUFFLER ASSY 5602-15110 • MUFFLER 1601-15120 • ARRESTER 01252-30550 BOLT M5x55 5500-15210...
- Page 20 This is the exclusive remedy. The purchaser shall bear costs of transporting the model EDG2300 to and from the RedMax dealers.
- Page 21 à compter de la date de livraison initiale d’une unité du modèle EDG2300. Telles sont les limites de la garantie. Le coût du transport de l'unité jusqu'au revendeur RedMax et depuis celui-ci sera à la charge de l'acheteur.
- Page 22 KOMATSU ZENOAH AMERICA INC. 4344 Shackleford Road Suite 500 Norcross, Georgia 30093 © Printed in Japan...