RCA look 15377550 User Manual page 8

Setup and Connections
Back of the Receiver
The diagram below describes each of the back panel jacks found on
your digital receiver. When connecting A/V cables, be sure to connect
corresponding OUTPUTS and INPUTS (Video to Video, Right Audio to
Right Audio, etc.).
OUT TO TV Use to connect the digital
receiver to your TV. However, if your TV
has audio/video jacks, you should use
those jacks to get better picture and
sound quality.
IN FROM ANT Use to
connect the digital
receiver system to an
alternative off-air
antenna or cable TV
signal.
S-VIDEO Provides the best
picture quality. If your TV has
S-VIDEO capability, use this jack
along with the audio/video jacks
to connect the digital receiver to
your TV.
6
OUT
TO
TV MMDS INPUT
VIDEO R AUDIO
CH 4
IN
CH 3
FROM
OUT
S-VIDEO OUT
AUX
OUT
AUDIO/VIDEO Provide better sound
and picture quality than the OUT TO
TV jack. If your TV has audio/video
capability, use these jacks to connect
the digital receiver to your TV. You
must also connect the VIDEO jack.
SMART CARD
L
REMOTE
OUT
SMART CARD Identifies you
to your program providers. The
digital receiver system requires
a valid smart card.
PHONE JACK