Philips NORELCO S5090 Manual page 20

20
English
2
1
3 Pull the shaving head holder off the bottom
part of the shaving unit.
4 Turn the retaining rings counterclockwise
and remove them.
5 Remove the shaving heads from the
shaving head holder. Each shaving head
consists of a cutter and guard.
Note: Do not clean more than one cutter
and guard at a time, since they are all
matching sets. If you accidentally put a
cutter in the wrong shaving guard, it may
take several weeks before optimal shaving
performance is restored.
6 Clean the cutter and guard with warm
water.
7 Put the cutter back into the guard.