Connecting A Component With Composite Video (Good); Connecting A Component With Component Video (Better) - RCA L42FHD37R User Manual

Connecting a Component with Composite Video (Good)

To connect a component with a video output jack, such as a DVD player, follow these steps:
Example: DVD Player
1. Connect the yellow video cable to the (VID 2) VIDEO jack on the side of the TV and to the video output
2. Connect the red and white audio cables to the (VID 2) right and left audio jacks on the side of the TV
Composite Video Connection
This is an example of a connection using the composite video jack.
Don't forget:
If necessary, connect
antenna or cable to get
a picture. Go to page 8
for instructions.

Connecting a Component with Component Video (Better)

To connect a component that has Y Pb Pr jacks, such as a DVD player, follow these steps:
Example: DVD Player
1. Connect three video cables or special Y Pb Pr cables to the COMPONENT INPUT 2 (CMPT 2) Y Pb Pr
2. Connect your red and white audio cables to the COMPONENT INPUT 2 (CMPT 2) right and left AUDIO
10
Chapter 1 Connections and Setup
jack on the DVD player.
and to the audio output jacks on the DVD player.
AUDIO/VIDEO
INPUT2 (VID2)
jacks on the back of the TV and to the Y Pb Pr outputs on the DVD player.
jacks on the back of the TV and to the audio output jacks on the DVD player.
Red
Yellow
White
COMPOSITE VIDEO CABLES ARE COLOR
CODED-YELLOW=VIDEO
RED=RIGHT AUDIO; WHITE=LEFT AUDIO