Explanation Of Jacks - RCA TruFlat 32F530T User Manual

Explanation of Jacks

This section describes the jacks you can use to make connections. There are several
ways to connect components to your TV.
G-LINK Connect the end of the G-LINK cable (provided) to this jack. The G-LINK
cable enables the TV's Guide Plus+ system to interact with the cable box and/or the
VCR. A picture of the G-LINK cable is on page 3.
CABLE/ANTENNA Lets you connect a coaxial cable to receive the signal from the
antenna, cable or cable box.
VIDEO R-AUDIO-L
VIDEO R-AUDIO-L
Y P
B
Chapter 1
Graphics contained within this publication are for representation only.
INPUT1
VIDEO, AUDIO R and L INPUTS Lets you connect a
component such as a VCR or DVD player.
• R AUDIO Provides right audio connection. The right
• L AUDIO Provides left audio connection. The left audio
• VIDEO Provides composite video connection. The video
• S-VIDEO Provides better picture quality than the video
INPUT2
VIDEO, AUDIO R and L and Y, Pb, Pr INPUTS Lets you
connect a component video source, such as a DVD player.
• Y, Pb, Pr Provides optimum picture quality because the
• R and L/MONO AUDIO and VIDEO Their description is
P
R
AUDIO OUT Lets you connect an amplifier or audio receiver
for improved sound quality.
R L
Connections & Setup
audio connector is usually red.
connector is usually white.
connector is usually yellow.
jacks because the color part of the signal is separated
from the black and white part of the picture. When using
S-VIDEO, make sure to connect left and right audio
cables to the INPUT1 AUDIO Input jacks.
video is separated into three signals. Use three video-
grade cables for the connection. When using Y, Pb, Pr,
make sure to connect left and right audio cables to the
INPUT2 AUDIO Input jacks.
the same as INPUT1.
5