Snapshot Tutorial; Using The Control Panel - Casio EXILIM EX-Z9 User Manual

Snapshot Tutorial

Using the Control Panel

The Control Panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
[SET]
2.
Use [8] and [2] to select the setting you want to change.
Image size/Quality* (pages 24, 57)
1
Flash mode (page 26)
2
Face detection (page 28)
3
Anti shake (page 30)
4
ISO sensitivity (page 31)
5
* Image quality cannot be changed using the Control Panel.
3.
Use [4] and [6] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You can configure the camera to turn off display of the Control Panel when you
press [SET] (page 96).
• You also can configure settings other than those listed above (page 46).
• The Control Panel cannot be displayed while a For YouTube, or Voice Recording
Operation is in progress.
Control Panel
1
2
3
4
5
6
7
8
9
White balance (page 31)
6
EV shift (page 33)
7
easy Mode (page 34)
8
Date/Time (page 36)
9
23
Snapshot Tutorial