Storing Stations In Memory; Rds Function - Pyle PLD71MU Owner's Manual

Radio Operation

Storing Stations In Memory

With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :
Touch the screen of the
FLAT 12:06
ST
FM1 87.60
MODE MUTE ON
1 2 3 4
VOLUME- SEL VOLUME+
Touch to preset station
-Store in Memory
> Select the frequency band
> Select the station
> Keep the desired memory key pressed
in until the station is heard again after a
brief interruption .
-Retrieve a preset station
Touch the
1-6 sections
a station which had been stored in the
memory in advance the chose number
is shown on display .
Automatic Memory Storing &
Program Scanning
Automatic Preset Setup
In Radio Mode, Touch and keep the
APS
APS section on the touch screen
for about 2 seconds to active
automatic station storage. The radio
searches within the current frequency
band,
" 1-6 " sections
NO-DISC DX
MHZ
5 6
briefly to retrieve
e.g. FM1, for the stronger signal
level until the search cycle has finished .
The six strongest stations are then
allocated to the corresponding storage
locations . Then the station of the first
storage location is set .
Scan Function
In Radio mode, briefly touch the
APS
APS section on the touch screen ,
the radio briefly plays all the
preset stations of the frequency band .

RDS FUNCTION

In Radio mode, touch it to select
the desired item, it will display the
following as below :
FLAT
ST
FM1
BND PTY S-WOOFER
TA AF CLK
STEREO/MONO
TA Traffic Announcement
(Priority For Traffic Information)
In Radio mode, touch briefly the
TA
screen of
the TA function.
Touch it again to turn off the TA function .
When the TA function is activated, the
TA symbol appears in the display .
During radio operation in one FM
frequency band the search for a traffic
announcement station is started
automatically (TA SEEK) .
If an FM station is being received which
transmits the latest traffic announce-
ments from time to time, the TP display
lights up.
-20-
12:06 AF
NO-DISC DX
87.60
MHZ
APS
LUD LOC/DX
DSP
"TA" range to activate