Table of Contents
Advertisement
4. Primary Master/Slave UDMA
Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive
supports it and the operating environment includes a DMA driver
(Windows 95 OSR2 or a third-party IDE bus master driver). If you
hard drive and your system software both support Ultra DMA/33,
select Auto to enable BIOS support.
VIA ONCHIP PCI DEVICE:
The options for these items are found in its sub menu. By pressing the
<ENTER> key, you are prompt to enter the sub menu of the detailed options
as shown below:
OnChip USB Controller
OnChip EHCI Controller
USB Keyboard Support
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
Descriptions on each item above are as follows:
1. OnChip USB Controller
This should be enabled if your system has a USB installed on the
system board and you want to use it. Even when so equipped, if you
add a higher performance controller, you will need to disable this
feature.
2. USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard.
PSB-1688LF USER
Phoenix – Award CMOS Setup Utility
VIA OnChip PCI Device
F6:Fail-Safe Defaults
'
S MANUAL
Chapter 4 Award BIOS Setup
[All Disabled]
[Enabled]
[Disabled]
F7:Optimized Defaults
Item Help
Menu Level ►
Page: 4-19
Advertisement
Table of Contents
