Battery Installation - Honeywell MIWI350 Quick Start Manual

Battery Installation

For a fresh Lead-Acid Battery, the No Load Voltage is expected to be between 12.5–13.5VDC.
WARNING: Please perform the No Load Battery Voltage measurement in an area rendered
Non-Hazardous. Please Exercise Caution to ensure the Battery Terminals do not come in
contact in any metal other objects during the measurement/handling.
(-cw)
Configure modem/EC/ERX350/HMI settings
11
(For more information, refer MIWI350 Installation and Operational Manual - FD-610)
06
09
(+cw)
07
check
4
08
10