Table of Contents
Advertisement
Fold the dosing aid downwards and
3.
click into place.
Slide in the detergent drawer.
4.
13.7 Dosing detergent and care
agent
Remarks
sex Use the dosing aid for liquid
Do not use with gel-like detergents,
washing powder, switched on
prewash or ready-in time.sex Keep
the directions for washing
agent and laundry care agent
→ Page 31 at.
Pull out the detergent drawer.
1.
Fill with detergent.
2.
→
"Detergent drawer", page 20
If desired, fill with a care product.
3.
Slide the detergent drawer into the
4.
appliance.
13.8 Starting the program
Remark: If you want to change the
time until the program end, first set
the ready in time.
on Start/Nachlegen to press.
▶
a The drum rotates and a
load recognition takes place, which
can take up to 2 minutes, after
which the water flows into the
device.
a The display shows whether the program
maduur or the ready in time
displayed.
a After the program end, it shows
display: "-0-".
13.9 Soaking laundry
Remark: No additional detergent is
needed. The soapy water is then used
for washing.
Start the program.
1.
To pause the program, after about
2.
10 minutes, press Start/Nightlegen.
To resume the program after the
3.
desired soaking time, pressStart/
Nachlegen.
13.10 Adding laundry
Press Start/Nachlegen.The
1.
device pauses.
Remark: When
it is not possible to add laundry.
When
goes out, then the refill
laundry possible.
Open the appliance door.
2.
Reload or remove the laundry.
3.
Close the appliance door.
4.
Press Start/Nachlegen.
5.
13.11 Program Cancel
on Start/Nachlegen to press.
1.
Open the appliance door.
2.
At high temperature and high
water level, the appliance door
remains locked for safety reasons.
– Start the program at a high
temperature To rinse.
Service NL
appears
33
Advertisement
Table of Contents
