Specifications - Porter-Cable N030679 Instruction Manual

CODE pOSSIBLE CAUSE
17 Faulty spark plug
18 Spark plug cap loose
19 No or low compression
20 No spark
21 Spark plug fouling is
sooty or sticky black
22 Dirty air filter
23 Improper valve clearances
24 Governor linkage stuck or bent
25 Throttle shaft stuck
26 Governor spring bent or lost
27 Dirty carburetor
pOSSIBLE SOLUTION
Replace spark plug
Attach spark plug cap securely
Tighten spark plug. If problem is not
corrected, contact a PORTER CABLE
factory service center or a PORTER
CABLE authorized service center.
Check spark plug wire. If problem
is not corrected, contact a
Customer Care Center.
Clean spark plug. See Spark
a.
plug under Maintenance.
b. Check spark plug gap, adjust
if needed. See Spark plug
under Maintenance.
c. Replace spark plug. See

Specifications.

d. If engine still fails to start, con-
tact a Customer Care Center.
Clean or replace the air filter elements
Reset valve clearances. Contact
a Customer Care Center.
Contact a Customer Care Center.
Contact a Customer Care Center.
Contact a Customer Care Center.
Contact a Customer Care Center.
30- ENG