Table of Contents
Advertisement
Normal Operation
Preparation After connections have been made, turn on the TV and select
the relevant video input before playback.
1. Turn on the player's power
Press the POWER button
on front panel to turn on the
power and the player will search
for the disc automatically. If there
is a disc in, the player will
automatically play it.
2. Press the EJECT button on
front panel or on remote control
to open the disc tray.
Warning: Do not play poor quality discs which may damage the lens.
DVD Playback
.
MENU
Normally there is a selecting menu on DVD disc. You can press the
MENU button to enter the disc menu directly, then use the direction
buttons to highlight the item you would like. Press the ENTER button to
select it.
TITLE & CHAPTER
Normally there are several titles on a DVD disc, and also there are
several chapters in a title. You can select any one of titles or chapters
quickly by using the Numeric buttons to enter the number of the chapter.
REGION CODE
This DVD player plays Region 1 DVD discs.
3. Load the disc
Load the disc as
shown in the figure
in
order
damage the player
or the disc.
4. Press the EJECT button to
close the disc tray and begin
playback.
not
to
- 22 -
Advertisement
Table of Contents
