Snapshot Tutorial
Using the Control Panel
The Control Panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
[8] [2] [4] [6]
[SET]
2.
Use [8] and [2] to select the setting you want to change.
Snapshot image size/quality*
1
(pages 32, 81)
Movie image quality (page 35)
2
Flash (page 36)
3
Self-timer (page 38)
4
AF Area (page 39)
5
* Snapshot image quality cannot be changed using the Control Panel.
3.
Use [4] and [6] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You also can configure settings other than those listed above (page 64).
• The Control Panel cannot be displayed while a Dynamic Photo, Prerecord Movie,
For YouTube, or Voice Recording Operation is in progress.
Control Panel
Available settings
ISO sensitivity (page 41)
6
easy Mode (page 41)
7
Face Detection/Make-up/Landscape
8
(pages 43, 45, 46)
Date/Time (page 47)
9
31
1
2
3
4
5
6
7
8
9
Snapshot Tutorial