Using The Voice Assist Function (Siri) - Sony SRS-XG300 Manual

Wireless speaker

Hide thumbs Also See for SRS-XG300:

Table of Contents

Help Guide

Wireless Speaker

SRS-XG300

Using the voice assist function (Siri)

By using the Siri function that comes with the iPhone, you can speak to the speaker's microphone to operate the iPhone.

The following shows how to use Siri.

Turn on Siri.

On the iPhone, select [Settings] - [Siri & Search] and enable [Listen for "Hey Siri"].

The operation above is an example. For details, refer to the operating instructions supplied with the iPhone.

For details on Siri, refer to the operating instructions or support website of the iPhone.

Connect the speaker to the iPhone via BLUETOOTH connection.

While the speaker is connected with the iPhone via BLUETOOTH connection and the iPhone is in standby

or playing music, press and hold the

The Siri is activated and you will hear the start-up sound.

Make a request to Siri through the speaker's microphone.

For details on Siri, such as apps which work with Siri, refer to the operating instructions supplied with the iPhone.

Note

For Apple iOS devices, the speaker is compatible with iOS 10.0 or later. A BLUETOOTH connection is not available on the

devices with iOS 9.x or earlier.

Siri cannot be activated when you say "Hey Siri" through the speaker's microphone even when the iPhone's [Listen for "Hey Siri"]

setting is on.

(play)/

(call) button for about 2 seconds.

Table of Contents