Using The Voice Assist Function (Siri) - Sony SRSXB33LCE7 Help Manual

Help Guide
Wireless Speaker
SRS-XB33

Using the voice assist function (Siri)

By using the Siri function that comes with the iPhone/iPod touch, you can speak to the speaker's microphone to operate
the iPhone/iPod touch.
The following shows how to use Siri.
Turn on Siri.
1
On the iPhone/iPod touch, select [Settings] - [Siri & Search] and enable [Listen for "Hey Siri"].
The operation above is an example. For details, refer to the operating instructions supplied with the iPhone/iPod
touch.
For details on Siri, refer to the operating instructions or support website of the iPhone/iPod touch.
Connect the speaker to the iPhone/iPod touch via BLUETOOTH connection.
2
While the speaker is connected with the iPhone/iPod touch via BLUETOOTH connection and the
3
iPhone/iPod touch is in standby or playing music, press and hold the
3 seconds.
The Siri is activated and you will hear the start-up sound.
Make a request to Siri through the speaker's microphone.
4
For details on Siri, such as apps which work with Siri, refer to the operating instructions supplied with the
iPhone/iPod touch.
Note
For Apple iOS devices, the unit is compatible with iOS 10.0 or later. A BLUETOOTH connection is not available on the devices
with iOS 9.x or earlier.
Siri cannot be activated when you say "Hey Siri" through the speaker's microphone even when the iPhone/iPod touch's [Allow
"Hey Siri"] setting is on.
5-011-823-11(2) Copyright 2020 Sony Corporation
69
(play)/ (call) button for about