Table of Contents
Advertisement
PLANET PoE IP Phone User's Manual
Keypad Description
1
Light
2
LCD Display
UP" Key
"
3
"
DOWN" Key
4
- IN VOL+
5
+OUT VOL-
6
SPEAKER
7
HOLD
8
NET
9
MESSAGE
10
Menu / OK
11
Cancel
TXT ←→ NUM Press this button and alphabets shown on the keypads will be
12
13
TRANSFER
14
Redial / Dial
Speed Dial
15
M1 – M10
16
Phone Book
The red light goes on-off when there is an incoming call.
Menu and all status shall be displayed for users.
To scroll up the menu items or left delete a digit per each key
press while editing the settings.
To scroll up the menu items or left delete a digit per each key
press while editing the settings.
When the IP phone is at idle state or talking on handset or
speaker, this key is used to increase/decrease the volume of
the voice sound.
Users are able to increase or decrease the volume which they
send out to remote party.
To switch between the usage of the handset and the speaker
devices.
To hold the conversation.
When users are not successfully registered to their service
provider, this button light will turn on-off. User can press this
button to try to register again to their service provider.
This is for future use of functions upgrade.
To bring out the menu selection while IP phone is in idle state.
To be used as "OK" key while editing. To be used as "Dial Out"
key when on dial mode.
To escape to an upper layer menu selection or to cancel the
current edit.
displayed.
To transfer an active call (incoming call answered or outgoing
call accepted) to another IP phone.
Press to dial the last dialed number when the IP phone is
off-hooked.
To make a speed dial call by pressing the speed dial key M1 –
M10.
By pressing this button to store up to 50 phone numbers.
6
Advertisement
Table of Contents
