The Hotkey Descriptions - Planar WS231 User Manual

(Analog mode)

The hotkey descriptions

1. Main Menu pop up /Auto-Adjust Hotkey
Press this button to activate the OSD Main
Menu. Press and hold this button for 2
seconds to activate the Auto Adjust
feature.
2. Contrast Adjust Hotkey
Press this button to activate the Contrast
Adjust function, use -/+ adjustment
control buttons to increase or decrease the
display's contrast.
3. Brightness Adjust Hotkey
Press this button to activate the Brightness
Adjust function, use -/+ adjustment
control buttons to increase or decrease
display brightness.
4. Port Select/Power switch Hotkey
Press and release this button immediately to select either Digital or Analog input mode.
Press and hold this button for 2 seconds to power on or power off the monitor.
Figure 2-9: When there is no input signal
Figure 2-10: The Hotkeys
(Digital mode)
13
User's Manual
Figure 2-11
Figure 2-12
Figure 2-13