Philips SRP2004WM/17 User Manual page 8

WM_17__Manual_80_210.indd 8
2.3.2 Improving keys
When correctly set up, the remote control
should be able to operate all your devices.
However, when using the remote control for the
first time it might occur that some keys do not
yet function as expected.
In this case you can have the remote control
search for alternatives.
Note
Improving keys is not possible when the code
was found during full database search (with
code '9, 9, 9, 9').
Duringinitialsetup
1
M ake sure the receiving device is able to
respond. E.g. when you try to repair the Play
key for your DVD player, make sure to insert
a DVD into the DVD player otherwise the
Play key is not able to function.
2
P ress the key that does not function, keep it
pressed and immediately release it when the
device responds. Repeat this for every key
that does not function.
• I f the key still does not function as expected,
try pressing it again for a longer period of
time.
Afterinitialsetup
1
M ake sure the receiving device is able to
respond. E.g. when you try to repair the Play
key for your DVD player, make sure to insert
a DVD into the DVD player otherwise the
Play key is not able to function.
2
S elect the device
that you wish to
operate (e.g. DVD).
P ress the
selection key to
select DVD.
3 K
eep keys
pressed
simultaneouslyfor
5seconds.
• T he red Setup
light lights
up. The remote control is now in setup
mode.
EN
8
device
and 
5 sec.
25-09-0