Using Continuous Shutter - Casio EXILIM EX-S300 User Manual

Using Continuous Shutter (CS)
Procedure
[r] (REC) * [SET] * MENU * REC Tab * CS
Your camera has three continuous shutter modes.
CS speed
4 images
4 fps
per second
10 images
10 fps
per second
3 images
Flash CS
per second
• To turn off a continuous shutter mode, select "Off".
*
fps (frames per second) is a unit of measurement indicating the number of images
recorded or played back per second.
1.
Use [8] and [2] to select the continuous shutter mode you want, and
then press [SET].
2.
Press the shutter button to shoot.
Images continue to be shot as long as you keep the shutter button depressed.
Releasing the shutter button stops shooting.
IMPORTANT!
• If there is not enough available capacity on the memory card, you may not be able
to record the number of CS images indicated on the monitor screen. Make sure
your memory card has sufficient remaining capacity before shooting with using
continuous shutter.
• With continuous shutter, exposure and focus for the first image are applied for
successive images as well.
• When using a continuous shutter mode, keep the camera still until shooting is
finished.
• Continuous shutter cannot be used in combination with any of the following.
– Premium Auto
– Some BEST SHOT scenes
– Make-up Mode, Landscape Mode
• The ISO sensitivity setting always is "Auto" for continuous shutter.
• You cannot use the self-timer in combination with "4 fps" or "10 fps".
• The flash range for Flash CS is narrower than that for normal flash.
• Shooting a very bright subject can cause a vertical band or a pink cast on the
monitor screen image. This does not indicate malfunction.
Maximum
Recorded Image Size
CS Shots
8 shots 2M (1600
20 shots 1M (1280
3 shots 2M (1600
69
1200 pixels) fixed
x
960 pixels) fixed
x
1200 pixels) fixed
x
Flash Mode
Flash Off
Flash Off
Flash On
Advanced Settings