First, charge the battery prior to use.
Note that the battery of a newly purchased camera is not charged. Perform the steps
under "To charge the battery" to bring the battery to a full charge.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-120)
for power. Never try to use any other type of battery.
To charge the battery
1.
Positioning the positive + and
negative - terminals of the
battery with those of the charger
unit, load the battery into the
charger unit.
2.
Plug the charger unit into a
household power outlet.
About 180 minutes are required to
reach full charge. The [CHARGE]
lamp will go out when charging is
complete. Unplug the power cord
from the power outlet and then
remove the battery from the
charger.
Lamp Status
Lit Red
Flashing Red
Off
Description
Charging
Abnormal ambient temperature, charger problem, or
battery problem (page 154)
Charging complete
17
[CHARGE] lamp
Quick Start Basics