Adjust Picture And Sound Settings - Philips Remote Starter User Manual

Clock and press OK to display the clock
permanently.
Quick access
Audio language
Subtitle language
Subtitle
Picture format
Equalizer
Clock
2. Press OPTION and press Î or ï to
select Clock again.
3. Press OK to hide the clock.
5�3 Adjust picture and sound
settings
This section describes how to adjust picture
and sound settings.
5�3�1 Use Settings assistant
Use Settings assistant to guide you through
picture and sound settings.
1. Press MENU on the remote control
and select TV menu > TV settings >
Settings assistant.
2. Press Æ to enter.
3. Press OK to Start now.
4. Press the green key on the remote control
to start the assistant.
5. Press Í or Æ to select the left or right side
to make your choice.
6. Press the green key to go to the next
setting. You will go through several settings.
When finished you will be prompted to
store these settings.
7. Press the green key to store all your
settings.
5�3�2 Adjust picture settings
This section describes how to adjust picture
settings.
1. Press MENU on the remote control
and select TV menu > TV settings >
Picture.
TV settings Picture
Settings assistant Contrast
Reset to smart settings Brightness
Colour
Picture
Hue
Sound
Sharpness
Tint
Pixel Plus HD
HD Natural Motion
Dynamic contrast
Noise reduction
MPEG artefact reduction
Colour enhancement
Active Control
Light sensor
Picture format
2. Press Æ to enter the list.
3. Press Î or ï to select a setting:
• Contrast
Changes the level of bright parts in the
picture keeping the dark parts unchanged.
• Brightness
Changes the level of light in the picture.
• Colour
Changes the level of saturation.
• Hue
If NTSC is broadcast, this level
compensates the colour variations.
• Sharpness
Changes the level of sharpness of fine
details.
• Tint
Sets the colours to Normal, Warm
(reddish) or Cool (bluish). Select Custom
to make a setting of your own.
EN-17