Product Outline; Specifications; Unpacking And Installation - Sharp AR-RP7 Service Manual

[1] PRODUCT OUTLINE

This machine is a duplex document auto feeder attached to a digital
copier.
It feeds originals automatically to allow continuous copying.

[2] SPECIFICATIONS

Document set direction Face up
Document set position Center reference
Document transport Sheet through type
system
Document feed sequence Top take-up feed
Document size AB series: A3 ~ A5
Inch series: 11 x 17 ~ 8.5 x 5.5
Document weight Simplex: 35 ~ 128g/m
Duplex: 52 ~ 105g/m
Document set quantity Max. 100 sheets
(90g/m
Dimensions 586mm (W) x 457mm (D) x 140mm (H)
Weight About 7.4 kg
Power source Supplied from the copier. (DC 24V)
Power consumption 26.4W
Document size detection On the document feed tray
Detection size Japan:
Inch series:
EX AB series: A3, B4, A4, A4R, A5, A5R
* : FAX and scanner
** : Simplex copy only
Mixture of different Mixture paper feed: Available (same width
document sizes only)
Document reverse Allowed (without 8.5 x 5.5)
(Invoice size, FAX send and scanner scan
are possible.)
Display section (LED) None
S 3 S : 23 sheets/min, 27 sheets/min
Document exchange
S 3 D : 18.4 sheets/min, 21.6 sheets/min
speed
Fax memory send/Scan function (200dpi)
2
, 9 ~ 34lbs
2
, 13.9 ~ 28lbs
2
: max. thickness 13mm)
A3, B4, A4, A4R, B5, B5R,
*
A5, A5R
11 x 17, 8.5 x 14, 8.5 x 11,
**
8.5 x 11R, 8.5 x 5.5 , 8.5 x
*
5.5R
: 40 sheets/min (A4R)
AR-RP7 PRODUCT OUTLINE

[3] UNPACKING AND INSTALLATION

1. Unpacking
For unpacking, refer to the figure below.
2. Installation
*
Intermediate tray
Turn off the main switch of the copier and then remove the
power plug of the copier from the outlet.
1. Remove the platen cover.
Lift the platen cover and remove it from the copier.
– 1 –
RSPF glass cover