Dell UltraSharp 27 User Manual page 13

4k usb-c hub monitor
Hide thumbs Also See for UltraSharp 27:
Table of Contents

Advertisement

7
Audio line-out
port
8
USB-C
upstream port
9,10,
11,12
Super speed USB
10 Gbps (USB 3.2
14
Gen2) (5)
13
RJ45 connector
15
USB-C
downstream port
16
Stand lock
Connect speakers to playback audio through HDMI or
DisplayPort audio channels. Only two-channel audio is
supported.
NOTE: The audio line-out port does not support
headphones.
Connect to your computer using the USB cable (A to C or
C to C). Once the USB cable is connected, you can use the
USB downstream connectors on the monitor.
NOTE: Remove the rubber plug when using USB-C
upstream connector.
Connect your USB device. You can use these ports only
after you have connected the USB cable (A to C or C to C)
from the computer to the monitor.
Port with
battery icon supports Battery Charging Rev.
1.2.
Connect Internet. You can surf Internet via RJ45 only after
you have connected the USB cable (A to C or C to C) from
the computer to the monitor.
Port with
icon supports 5V / 3A.
Connect your USB device. You can use this port only after
you have connected the USB cable (A to C or C to C) from
the computer to the monitor.
Lock the stand to the monitor using a M3 x 6 mm screw
(screw not included).
About Your Monitor
|
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ultrasharp 32U2723qxU2723qeU3223qeUltrasharp u2723qxUltrasharp u2723qe ... Show all

Table of Contents