When The Appliance Is Not In Use; Something Not Working - Electrolux EUFG29800W Instruction Book

Hide thumbs Also See for EUFG29800W:
Table of Contents

Advertisement

When the appliance is not in use

Disconnect the appliance from
electricity supply.
Empty all foods and clean the
appliance, leaving the doors ajar to

SOMETHING NOT WORKING

Before contacting your local Service Force Centre check the following point:
Problem
" " is displayed in the
temperature display.
Audible alarm + flashing red
warning lamp. (It is too warm
inside the freezer.)
It is too warm inside the
freezer.
17
prevent unpleasant smells.
If the cabinet will be kept on, ask
somebody to check it once in a while
to prevent the food inside from spoiling
in case of a power failure.
Possible cause / Remedy
Please contact your local Electrolux Service
Force Centre
Switch off the audible alarm by pressing the
alarm off button.
The audible alarm could have been triggered
by:
The cabinet having been recently switched
on and the temperature still being too high.
See the chapter "Switching on and setting
the temperature".
The door may have been open for so long
that the `door open' alarm was triggered.
Set a lower temperature.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
If warm food products have been put inside
the freezer, wait for a couple of hours and
then check the temperature again.
Distribute the food products to allow cold air
to circulate around them.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eufg29800x

Table of Contents