Disconnect Gogear Vibe Safely; Turn Gogear Vibe On And Off; Automatic Standby And Shut-Down - Philips GoGear SA1VBE User Manual

Disconnect GoGear Vibe safely

To avoid data loss, disconnect GoGear Vibe
from your computer as follows:
1
On your computer, exit all applications
that are working with GoGear Vibe.
2
Click in the task tray of your computer.
3
Wait for the confirmation that GoGear
Vibe can be safely removed, then
disconnect GoGear Vibe from the USB
port.

Turn GoGear Vibe on and off

1
To toggle between modes on and off,
slide and hold for approximately 2
seconds.

Automatic standby and shut-down

GoGear Vibe has an automatic standby and
shut-down feature that can save battery
power.
After 10 minutes in idle mode (no music plays,
no button is pressed), GoGear Vibe turns off.
1
Slide and hold for approximately 2
seconds to turn GoGear Vibe on again.
GoGear Vibe has a lock switch to prevent
accidental operation.
1
To lock the buttons when you play, move
the slider to position .
» All buttons except the volume keys are
locked and the display shows a lock
icon.
2
To unlock the buttons again, move the
slider to the center position.
EN
9