Manually Verify / Update Firmware - Philips GoGear SA075 Quick Start Manual

Manually verify / update firmware

1 Ensure that your computer is connected to the Internet.
2 Connect SA075 to the computer (see section
instructions).
3 On your computer, click
device Manager to launch Philips device Manager.
4 Click Update.
Philips GoGear SA075 Device Manager
»
the Internet, if available.
5 When the display shows
6 Disconnect SA075 from the computer.
The display of SA075 shows
»
SA075 restarts after the firmware is updated and is ready for use again.
»
Start > Programs > Philips digital audio Player > Sa075
Update completed, click OK.
Updating firmware.
connect Sa075 to a computer for
checks for updates and installs new firmware from
13