To shoot a snapshot
Diopter dial
[EVF/LCD]
Viewfinder
Monitor screen
The following procedure describes how to shoot a single snapshot. For information
about shooting a series of shots (Continuous Shutter), see page 56.
1.
Remove the lens cap and then press [r] (REC) to turn on the camera.
2.
Set the mode dial to t (Single Shot).
3.
Press [8].
4.
Use [8] and [2] to select the top option in the
control panel (Exposure mode).
5.
Use [4] and [6] to select t (Auto) and then
press [SET].
• You can use either monitor screen or viewfinder to
compose the image. Each press of the [EVF/LCD]
button cycles through the available monitor screen
and viewfinder on/off settings (page 158). If the
image in the viewfinder appears blurry, use the
diopter dial to adjust it.
[r] (REC)
[8] [2] [4] [6]
26
Shutter button
Mode dial
[SET]
Snapshot mode icon
Remaining snapshot
memory capacity
Quick Start Basics
(page 183)