Advanced Routing; Static Route List - TP-Link Archer C2 User Manual

Chapter 4
Done!

4. 11. Advanced Routing

Static Routing is a form of routing that is configured manually by a network administrator
or a user by adding entries into a routing table. The manually-configured routing
information guides the router in forwarding data packets to the specific destination.

4. 11. 1. Static Route List

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
¾ To add static routing entries:
1. Click
2. Enter the following
•
Downloaded from ManualsNet.com
7. Select
control policy to pass through the Router
policy and click Save.
Now only the specific host(s) can visit the target(s) within the
scheduled time period.
Advanced Routing > Static Route
Add New.
information.
Destination IP Address
or host that you want to assign to a static route.
search engine
Allow the packets specified by any enabled access
List.
- The Destination Network is the address of the network
Configure the Router
as the default filter
47