47" base installation
1.
Place TV unit face down on a soft and flat surface(blanket,foam,c
loth,etc.) to prevent damage to the TV.remove 6 pieces of screws
as indicated in the illustration by cross-shaped screwdriver.
Remove six pieces of screws
2.
Take out the base assembly out of the box, and put the cover_
stand and base on the table.
3.
Put the base on the right position of monitor and lock it tightly.
Remove the two pieces of screws which mared before Inserting
the screws back to the right position as indicated.
base
the two pieces of screws which marked
14
Cover_stand