2.
As indicated in the illustration, put the cover_stand
base b (the 32" TV overleap this step, turn into the next step
directiy).
3.
Put the base assembly on the right position of rear cover as
indicated in the illustration.
4.
Insert the screws back to the right position as indicated in the
illustration by cross-shaped screwdriver. the 32"TV use the
primary screws, the two long screws in the pe bag for accessory
instead of the two pieces of screws primary in the bottom position
of 42" TV(attention:there are two type of screws as indicated
in the illustration,it must be inserted the right type of screws to
guarantee the safety of TV).
5.
Place the TV unit on a firm and flat surface.
(the screw thread is dense)
(the screw thread is sparse)
13
a on the