Instrument and control functions
1
2
2
3
4
1. Slot
2. Projection
3. Seat holder
2. Place the seat in the original posi-
tion, tighten the bolt, and then
close the cap.
TIP
Make sure that the seat is properly se-
cured before riding.
Adjusting the front fork
WARNING
Always adjust both fork legs equally,
otherwise poor handling and loss of
stability may result.
This front fork is equipped with re-
bound damping force adjusting screws
and compression damping force ad-
justing screws.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Rebound damping force
1. Remove the protector.
4-8
EAU84383
EWA10181
1. Protector
2. Turn the adjusting screw in direc-
ECA10102
tion (a) to increase the rebound
damping force. Turn the adjusting
screw in direction (b) to decrease
the rebound damping force. To
set the rebound damping force,
turn the adjuster in direction (a)
until it stops, and then count the
clicks in direction (b).
1