To Replace The Memory Card; Formatting A Memory Card - Casio Exilim EX-Z750 User Manual

USING A MEMORY CARD

To replace the memory card

1.
Press the memory card
into the camera and
then release it. This will
cause the card to come
part way out of the
camera.
2.
Pull the memory card out of the slot.
3.
Load another memory card.
IMPORTANT!
• Never insert any other object besides a memory card
into the camera's card slot. Doing so creates the risk
of damage to the camera and card.
• Should water or any foreign object ever get into the
card slot, immediately turn off the camera, remove
the battery, and contact your dealer or nearest
CASIO authorized service center.
• Never remove a card from the camera while the
green operation lamp is flashing. Doing so can cause
the file save operation to fail, and even damage the
memory card.

Formatting a Memory Card

Formatting a memory card deletes any data already stored
on it.
IMPORTANT!
• Be sure to use the camera to format a memory card.
Formatting a memory card on a computer and then
using it in the camera can slow down data
processing by the camera. In the case of an SD card,
formatting on a computer can result in non-
conformity with the SD format, causing problems with
compatibility, operation, etc.
• Note that data deleted by a memory card format
operation cannot be recovered. Check to make sure
you do not need any of the data on the memory card
before you format it.
• Formatting a memory card that contains files deletes
all the files, even those that are protected (page
161).
179