Casio Exilim EX-Z750 User Manual page 107

OTHER RECORDING FUNCTIONS
4.
Use [ ] and [ ] to specify the length of the
future part (the after part the shutter button is
pressed), and then press [ ].
5.
Use [ ] and [ ] to select the MOTION PRINT
layout format you want, and then press [SET].
To do this:
Store a capture of the
image at the point the
shutter button is pressed
to start Short Movie
Mode recording, and
display it on a
background of eight
frames
Store a capture of the
image at the point the
shutter button is pressed
to start Short Movie
Mode recording
Turn off MOTION PRINT (no snapshot stored)
6.
Point the camera at the subject and then
press the shutter button.
• This will record a movie of the length specified by the
time values you specified in steps 3 and 4.
Recording stops automatically.
• To stop recording part way through, press the shutter
button again.
Select this
setting:
IMPORTANT!
• Note that in the Short Movie Mode, movie data is
continually recorded and stored in a buffer before
you press the shutter button. Be sure to keep the
9 frames
camera still and pointed in the direction of the
subject for some time before you press the shutter
button to start recording.
• When a Short Movie Mode record operation starts
future part recording, the monitor screen will show a
countdown of the remaining recording time.
1 frame
Recording continues until the end of the countdown
is reached.
Off
107