Casio Exilim EX-Z75 User Manual page 43

■
Battery Power Conservation Features
This camera is equipped with a sleep function and auto power
off function to conserve battery power. You can configure these
settings in the REC mode as described below.
Feature
Description
Name
The monitor screen turns off (goes
into a sleep state) if no operation is
Sleep performed for a preset amount of
time. Press any button to turn the
monitor screen back on.
Power turns off if no operation is
Auto Power
performed for a preset amount of
Off
time.
• Sleep and Auto Power Off always operate as described below
in the PLAY mode, regardless of their current PLAY mode
settings.
– Sleep does not function in the PLAY mode.
– The Auto Power Off trigger time is always five minutes.
1.
Press [MENU].
2.
Use [ ] and [ ] to select the "Set Up" tab.
3.
Use [ ] and [ ] to select the item you want to
configure ("Sleep" or "Auto Power Off") and
then press [ ].
4.
Use [ ] and [ ] to select the sleep or Auto
Power Off trigger time and then press [SET].
Settings
Selecting "Off" for the sleep setting disables the sleep
feature.
30 sec
1 min
NOTE
2 min
• When both sleep and Auto Power Off have the same time
Off
settings, Auto Power Off takes priority.
• Sleep and Auto Power Off are disabled under the following
1 min
conditions.
2 min
– When there is a connection between the camera and
5 min
computer or other device
– During Voice Recording playback or recording
– During movie recording and playback
43
GETTING READY