■
Setting the Playback Volume Level
You can use this procedure to set the playback volume level for
movies and audio snapshots, independent of the operation tone
volume.
1.
Press [MENU].
2.
On the "Set Up" tab, select "Sounds" and then
press [ ].
3.
Use [ ] and [ ] to select "
4.
Use [ ] and [ ] to specify the operation tone
volume setting you want and then press [SET].
• You can set the volume to one of eight levels in the range
of 0 (lowest) to 7 (highest).
• Setting a volume level of 0 mutes the sound.
IMPORTANT!
• The volume setting you configure here does not affect the
video output (page 131).
B
Turning the Startup Screen On or Off
You can configure the camera to display a startup screen of an
image you recorded, whenever you turn it on.
• Even if you configure startup screen settings in the PLAY
mode, the startup screen does not appear when turn on the
camera by pressing [
1.
2.
Play".
3.
4.
163
] (PLAY).
Press [MENU].
On the "Set Up" tab, select "Startup" and then
press [ ].
Use [ ] and [ ] to scroll through the images
until the one you want to use as the startup
screen is on the monitor screen.
Use [ ] and [ ] to select the setting you want
and then press [SET].
To do this:
Use the selected image as the
startup screen
Turn off the startup screen
Select this setting:
On
Off
OTHER SETTINGS