Incoming messages (ICM)
Each message can be up to 3 minutes long.
When you receive new messages, the new
message indicator flashes on the answering
machine and the handset displays a notification
message.
Note
•
If you pick up the phone when the caller leaves
a message, the recording stops and you can
talk to the caller directly.
Note
•
If the memory is full, the answering machine
switches to [ANSWER ONLY] automatically.
Delete old messages to receive new ones.
Listen to the incoming messages
You can listen to the incoming messages in the
sequence they are recorded.
From the base
•
Start/Stop listening: Press
•
Adjust the volume: Press
•
Skip backward:
- When you listen to the messages, press
to listen to the message from the
beginning.
- D uring the first second of the current
message, press
previous message.
•
Skip forward: Press
message.
•
Delete the current message: Press
Note
•
No deleted messages can be recovered.
.
/
.
to listen to the
to skip to the next
.
From the handset
1
When [NEW MESSAGE] displays on the
handset screen, press OK to listen to the
new messages.
2
Press
/
to increase/decrease the
volume.
Note
•
You can listen to the old messages through the
base station only.
Delete an incoming message
From the base
1
Press
when you listen to the message.
»
The current message is deleted.
Delete all old incoming messages
From the base
1
Press and hold
All old messages are permanently
»
deleted.
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1
Press MENU.
2
Select [ANSW MACHINE] >
[SETTINGS] > [RING DELAY], then
press OK to confirm.
3
Select a new setting, then press OK to
confirm.
The setting is saved.
»
in standby mode.
EN
33