Call Screening; Remote Access; From The Base; Set The Sound Quality Of The Message - Philips CD360 User Manual

3
Press [OK] to confirm.
» All old messages are permanently
deleted.
Note
•
You can delete the read messages only. No
deleted messages can be recovered.

Call screening

You can hear the caller while he is leaving a
message. Then you can decide whether or not
to talk to the caller directly.

From the base

Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.

Set the sound quality of the message

You can adjust the sound quality of the
messages received from the answering
machine.
1
Press menu.
2
Select [ANSWER MACHINE] >
[SETTINGS] > [MSG QUALITY], then
press [OK] to confirm.
3
Select the new setting, then press [OK]
to confirm.
The setting is saved.
»

Set the ring delay

You can set the number of times the phone
rings before the answering machine picks up
the call.
1
Press menu.
2
Select [ANSWER MACHINE] >
[SETTINGS] > [RING DELAY], then
press [OK] to confirm.
3
Select a new setting, then press [OK] to
confirm.
The setting is saved.
»
EN
38
Note
•
Ensure that the answering machine is switched
on before this feature can be applied.
Tip
•
When you access the answering machine
remotely, you are recommended to set the
ring delay to [ECONOMY] mode. This is a
cost effective way to manage your messages.
When there are new messages, the answering
machine picks up the call after 3 rings; When
there is no messages, it picks up the call after
5 rings.

Remote access

You can operate your answering machine
when you are away from home. Simply make
a call to your phone with a touch tone phone
and enter your 4-digit PIN code.
Note
•
The preset remote access PIN code is 0000.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Press menu.
2
Select [ANSW. MACHINE] >
[SETTINGS] > [REMOTE ACCESS],
then press [OK] to confirm.
3
Select a new setting, then press [OK] to
confirm.
The setting is saved.
»