Troubleshooting
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/ENGLISH/PRODUCT/safety/saf_troub.htm (3 of 3)2009/4/23 上午 09:19:44
An after-image remains after the power
has been turned off.
Green, red, blue, dark, and white dots
remains
Adjust blue "power on" light
For further assistance, refer to the
Consumer Information Centers
representative.
This is characteristic of liquid crystal and is not caused by a
malfunction or deterioration of the liquid crystal. The after-
image will disappear after a period of time.
The remaining dots are normal characteristic of the liquid
crystal used in today's technology.
Adjust blue "power on" light using the power LED of Setup in
OSD Main Controls.
list and contact Philips customer service
RETURN TO TOP OF THE PAGE