Samsung VS20R90 Series User Manual page 11

• Static electricity may occur
depending on the humidity,
temperature, or floor material,
etc. in your home. If it happens
repeatedly, contact a Samsung
service center.
• Please charge the battery fully:
– Before using a newly purchased
battery for the first time or if
you haven't used the battery for
a long time.
– When the battery level indicator
is on the lowest indication and
blinks.
• If you are not going to use the
vacuum for a long period of
time or you're going to be away
from home for a long period of
time, unplug the charging stand,
and then detach the charging
stand from the battery. When
the battery is not being charged
and not being used, it will slowly
discharge.
• When the battery level is low,
recharge it. If the level of the
battery remains low for a long
period of time, it can cause the
performance of the battery to
degrade.
• Clean the multi-use wet pad of the
wet brush gently with hands by
using a washing soap.
• If the wet pad is exposed to heat
or softener, it may be modified
and product performance can be
degraded.
• The multi-use wet pad can be
cleaned using a washing machine.
However, if it is boiled, the pad
may be modified or discolored
and product performance can be
degraded.
• Use a genuine wet pad of
Samsung Electronics for wet
brush.
• If the wet brush is used without a
wet pad, any product malfunction
will not be covered by warranty
and a service fee will be charged.
• When you purchase an additional
multi-use wet pad for the wet
brush, contact a Samsung service
center.
• When you purchase an additional
single-use wet pad, check the
model name VCA-SPA90.
CAUTION
• When the spinning brush (drum)
inside a brush is working, do not
touch the brush.
– Otherwise, your hand can be
caught and it may cause an
injury.
• Before using the wet brush,
detach the wet pad and put some
water on it, then reattach it to the
spin disk.
• When assembling the handle, be
careful not to catch your fingers
or hands in the movement fold of
the handle.
English 11