Casio Exilim EX-Z120 User Manual page 187

PRINTING IMAGES
1.
Press [MENU].
2.
Select the "Set Up" tab, select "USB", and
then press [ ].
3.
Use [ ] and [ ] to select the setting you
want, and then press [SET].
When connecting to this type of
device:
Computer or USB DIRECT-
PRINT-compatible printer
PictBridge-compatible printer
• Mass Storage (USB DIRECT-PRINT) causes the
camera to see the computer as an external
storage device. Use this setting for normal transfer
of images from the camera to a computer (using
the bundled Photo Loader application).
• PTP (PictBridge) simplifies the transfer of image
data to the connected device.
Select this setting:
Mass Storage (USB
DIRECT-PRINT)
PTP (PictBridge)
187
4.
Check the battery level indicator to make sure
that the batteries are fully charged, and then
press the power button to turn off the camera.
• If battery power is low, replace the batteries or switch
to AC power.
• To power the camera using AC power, you need to
purchase an optionally available AC adaptor.
• The camera does not draw power over the USB
cable.