Changing The Usb Port Protocol - Casio Exilim EX-Z120 User Manual

OTHER SETTINGS

Changing the USB Port Protocol

You can use the procedure below to change the
communication protocol of the camera's USB port when
connecting to a computer, printer, or other external device.
Select the protocol that suits the device to which you are
connecting.
1.
Press [MENU].
2.
Select the "Set Up" tab, select "USB", and
then press [ ].
3.
Use [ ] and [ ] to select the setting you
want, and then press [SET].
When connecting to this type of
device:
Computer or USB DIRECT-
PRINT-compatible printer (page
186)
PictBridge-compatible printer
(page 186)
* "PTP" stands for "Picture Transfer Protocol".
Select this setting:
Mass Storage (USB
DIRECT-PRINT)
PTP (PictBridge)*
172
• Mass Storage (USB DIRECT-PRINT) causes the
camera to see the computer as an external storage
device. Use this setting for normal transfer of images
from the camera to a computer (using the bundled
Photo Loader application).
• PTP (PictBridge) simplifies the transfer of image data
to the connected device.