Table of Contents
Advertisement
3
System Overview
This section gives a brief overview of the indoor part of the MINI-LINK High
Capacity terminal. For more information, see the MINI-LINK Product Portfolio
Description.
3.1
Introduction
The MINI-LINK terminal consists of an outdoor and an indoor part.
Figure 4
The outdoor part A is described in the MINI-LINK Point-to-point Outdoor
Installation Manual.
The indoor part B consists of a Modem Unit (MMU) and a Traffic Unit (TRU),
which are housed in one common Access Module Magazine (AMM). A fan
unit provides the AMM with cooling. For protected systems, two MMUs and
one TRU are used.
The radio unit is connected to the indoor units with a single coaxial cable C.
A management system is used for operation and maintenance of the terminal.
The integrated control and supervision system continuously monitors the
transmission quality and alarm status.
EN/LZT 712 0156 R1A 2002-10-01
A
POWER
ALARM
RADIO
C
Outdoor and indoor units
MINI-LINK High Capacity Indoor Installation Manual
B
5391
11
Advertisement
Table of Contents
