Setup Adjustment
1
SET UP
Press to display the SETUP MENU.
2
Press to select the desired function.
Press to adjust or change the
function.
SETUP MENU
TELETEXT
FASTEXT
OFF TIMER
OFF
CH COLOUR SET
CHILD LOCK
OFF
BLUE BACK
ON
ILLUMINATION
ON
3D-COMB
ON
3
TV/AV
Press to go back to watching TV.
OFF TIMER
Switches the TV off within a preset time which you can choose
from between 0 to 90 minutes in 15 minutes intervals.
OFF
15
90
CH COLOUR SET
Colour density varying between broadcast channels can be
adjusted to three levels for each reception channel.
During AV mode, the appearance of the SETUP MENU will differ from that of the TV mode, with the following function adjustments
becoming available.
COLOUR SYSTEM
During AV mode, COLOUR SYSTEM is displayed.
If a clear picture with current colours cannot be obtained when
a Broadcast or AV signal is received, then the colour system
will change as shown.
AUTO
PAL
NTSC3.58
PAL, SECAM and NTSC 3.58 are different colour signal broadcast
transmission systems applicable to differing countries. NTSC 4.43
is a trick playback mode used in special VCR to playback NTSC
recorded video tapes through PAL television equipment.
SETUP MENU
TEXT SELECT
ENGLISH
PICTURE SHIFT
ON
TUNING MENU
LANGUAGE
OWNER ID
CONVERGENCE
30
45
75
60
TV / AV - EXIT
SETUP MENU
COLOUR SYS
PAL
FLICKER REDUC.
ON
3D-COMB
ON
TEXT SELECT
ENGLISH
PICTURE SHIFT
ON
LANGUAGE
OWNER ID
CONVERGENCE
SECAM
NTSC4.43
CHILD LOCK
If the Child-Lock function is set ON, picture and sound of the TV/AV
mode being viewed will disappear and a Black screen will appear.
BLUE BACK
You can choose Blue Back display ON or OFF when there is no signal.
ILLUMINATION
Select "ON" to illuminate the ILLUMINATION LIGHT on the front
panel. Otherwise, select "OFF".
3D-COMB
You can choose 3D-COMB function ON or OFF. If the 3D-COMB
function is ON, dot interference or cross colour will be reduced.
Note: Not available in component and RGB input.
PICTURE SHIFT
For use as a screen saver, this function changes the entire
picture position (shift) approximately 2 mm every 15 minutes.
LANGUAGE
When you first install the TV, the On Screen Display language is
set according to your choice of region. LANGUAGE lets you change
the language used for On Screen Displays (refer to page 5).
[ for TX-43/51P800H ]
English
SELECT
CHANGE
SETUP MENU
TELETEXT
FASTEXT
OFF TIMER
OFF
CH COLOUR SET
CHILD LOCK
OFF
BLUE BACK
OFF
ILLUMINATION
OFF
VCR / GAME
OFF
FLICKER REDUCTION
Lets you control any picture movement. Set to ON to activate
motion compensation, to smooth the image and get rid of picture
movement. Set to Off to have no flicker reduction at aIl,
occasional broadcasts may benefit from using this setting.
VCR/GAME
Reproduction of irregular signals, such as certain TV games
and rental video tapes, may be improved.
[ for TX-43/51P800X ]
English
Chinese
ON
OFF
Arabic
23