Suzuki GSX-S1000 Installation Instructions Manual page 8

8/17
2. Open the gap between the grip
and the handlebar with a -
driver, then inject degreasing
agent to pull out the grip.
Use the - driver with care so
as not to scratch the surface
of the handlebar.
NOTE: Removed left side grip will
3. Wipe off the rest of adhesive
adhered to the handlebar by
using a degreasing agent and a
waste cloth.
4. Apply cement evenly and rather
abundantly to the inside of the
Grip Heater (L) 4.
GENUINE SUZUKI ACCESSORIES
NOTICE
not be reused.
Clean cloth
Grip cement
Grip Heater (L)
Handlebar
Degreasing
agent