Table of Contents
Advertisement
TV Mode
Last updated: May 10, 2022 01:29. Revision #4030
On later units, a switchable TV mode was introduced that improves the performance of the DacMagic 200M whilst using a TV as a source. This configures
the DacMagic 200M with a higher bandwidth to reduce glitches and interruptions when connected to a TV.
TV mode is only effective on the D2 input and can be enabled and disabled by following the instructions below.
1.
With the DacMagic 200M in standby mode, long press the source button.
2.
Two LEDs will light up to indicate the TV mode status.
TV mode on enabled: 44.1/192 LEDs light up
TV mode disabled: 96/705.6 LEDs light up
23
Advertisement
Table of Contents
