Other Play Methods; Program Play; Changing The Sound Quality; Resume Play - Panasonic SL-CT470 Operating Instructions Manual

Other Play Methods

The letters such as A in the various illustrations refer to the descriptions in the "Location of Controls" section. (See page 3.)
Skip play
The disc plays from the selected track through to the last track,
then play stops automatically.
Preparation:
Put unit in stop mode. (See page 3.)
1
RESUME RANDOM NORMAL
K
2
Select the desired track.
C
:
3
G 1

Program play

Up to 24 tracks can be entered in the program.
Preparation:
Put unit in stop mode. (See page 3.)
1
RESUME RANDOM NORMAL
K
2
Select the desired track.
C
:
3
Register in sequence.
(The indication "M" and the programmed sequence appear
on the display.)
MEMORY/RECALL
A
4
Repeat steps 2 and 3 to program all the
desired tracks.
5
G 1
∫ To program the same track in the sequence more
than once
After step 3, press [MEMORY/RECALL] the desired number of
times.
Anti-Shock Function
The anti-shock function works by reading audio data and storing
it in memory (up to 40 seconds worth). The unit then fills in inter-
ruptions caused by bumps and vibrations with data from the
memory. This unit also incorporates a powerful anti-shock mech-
anism that prevents skipping caused when play speed is
changed by swinging of the unit.
Press during play or stop mode.
A.SHOCK
F
The following indicator appears on the display.
S - XBS
A.SHOCK
D
4
∫ If "'" is displayed
No more tracks may be programmed.
∫ To confirm the contents of the program
Press [MEMORY/RECALL] while the disc is playing. (The num-
bers of the programmed tracks appear on the display in se-
quence.)
∫ To delete the entire program
Press [∫, OPR OFF].
Random play
1
9
5
6
2
;
Release
For your reference:
≥It is also possible to press [9] while the unit is in stop mode
to change the first track to be played. (All tracks are played
eventually, regardless of which is played first.)
≥Program play is not possible in the random mode.

Resume play

This function allows you to listen from the beginning of the track
9 5
6
where play stopped because the unit was powered off (or
switched to stop mode). It is useful when listening to CDs in the
car, etc.
Release
For your reference:
≥If [RESUME, RANDOM, NORMAL] is put in the [RESUME] po-
sition, the all-track repeat function will be activated automatical-
;
ly as soon as the unit is powered on.
≥If power is cut off near the end of a track (off mode), playback
may resume from the beginning of the next track.
≥If the unit is powered off while a disc was playing and then a
new disc is inserted, play will begin from the middle of the new
disc because the unit remembers the position where play
stopped on the previous disc.
Note!
If you have pressed [A.SHOCK] when the unit is in stop mode,
press [1;] to start play.
When bumps continue repeatedly
The message "SORRY" appears on the display and sound is in-
terrupted.
To cancel the anti-shock function
Press [A.SHOCK] again.
RESUME RANDOM NORMAL
K
G
1 ;
RESUME RANDOM NORMAL
K
RESUME RANDOM NORMAL
K
RESUME RANDOM NORMAL
K
SORRY
S - XBS
A.SHOCK
D
Repeat function
Press during play or stop mode.
`
E
The setting is switched in the sequence indicated below each
time [`] is pressed.
1-track repeat (1 `)( -----------]
|
One track is repeated.
|
v
|
All-track repeat (ALL `)
|
All the tracks on the
|
disc are repeated.
|
v
Cancel (no indicator is shown) --}
For your reference:
ALL `
If " " is selected during program play, only the tracks in
the program are repeated.
(The indication "ALL" is not displayed.)

Changing the sound quality

Press during play or stop mode.
EQ
B
The setting switches in the sequence indicated below each time
[EQ] is pressed.
S-XBS>TRAIN>LIVE>Cancel (no indicator is shown)
^---------------------------------------------------}
S-XBS:
Select this setting to boost the low-range response.
TRAIN:
Select this setting to avoid annoying other passengers with noise
from your earphones while riding on the train, or to reduce fa-
tigue when listening for a long period of time.
LIVE:
Select this setting for a live concert effect.
Note.
≥The anti-shock setting can be changed during play, but this
may cause a slight interruption in the sound because the disc's
rotational speed changes.
≥During the anti-shock operation, the disc rotates at a higher rate
than usual in collecting extra audio data.
≥This could result in a slight increase in disc rotation noise.
Listening to sound with the unit connected to
an audio system
The anti-shock function uses digital signal compression technolo-
gy. It is recommended that the anti-shock function be cancelled if
the unit is connected to a home audio system.
RQT5348