Panasonic RR-QR120 Operating Instructions Manual page 4

Playback
1
2
3
4
To stop play
∫
Press [STOP] or [∫]. Press [1] to resume play from where you stopped it.
To move to other files during play
∫
Press [:,9].
Fast forward and rewind
∫
Press and hold [:,9]. You can fast forward and rewind not only within a file, but
the previous and the following files as well.
Note .
Volume may be changed after fast forwarding, rewinding, and stopping.
To check the remaining playback time
∫
Press [ $ FOLDER / % MENU] during play.
Press again to restore the display.
To listen to the first 5 seconds of each file (Intro-scan)
∫
1 Press [ $ FOLDER / % MENU] to select the folder.
2 Press and hold [1] while stopped .
If you want to listen to a file in full, press [1] while it is playing.
To change playback speed
∫
1 Press and hold [ $ FOLDER / % MENU] while stopped.
2 Within 10 seconds, press [ $ FOLDER / % MENU] until
"SPEEd" is displayed.
3 Within 10 seconds, press[:,9] to select the speed.
Slow
SLOW
0 ・ 50 ・ 100
4 Within 10 seconds, press [1].
The speed is selected.
For your reference
Press and hold [STOP] or [∫] to restore normal playback speed.
Using earphone
∫
(not included)
Sound will not be heard from the speaker.
1
Plug type: 3.5 mm ( ⁄ in.) monaural
8
Turning the operation tone on and off
A tone sounds each time an operation is performed if you select "On".
1 Press and hold [ $ FOLDER / % MENU]
while stopped.
2 Within 10 seconds, press [ $ FOLDER /
% MENU] until "bEEP" is displayed.
3 Within 10 seconds, press [9] to select
"On" (factory setting) or [:] to select "OFF".
4 Within 10 seconds, press [1].
Press [ $ FOLDER / % MENU] to
select the folder.
Press [ ] to select the
:,9
file.
Information about the selected file appears in
the following order:
1 Date of recording
2 Time of recording
3 Length of recording
4 Number of files
Press [ ].
1
Playback starts.
B
Play time
H
Adjust the volume.
HQ
B
H
Normal
FAST SLOW FAST SLOW
0 ・ 50 ・ 100 0 ・ 50 ・ 100
Plug in firmly.
6
Editing
HQ
M S
∫ Erasing files
1 Press [ $ FOLDER/ % MENU] to select
the folder.
2 Press and hold [ERASE].
3 Within 10 seconds, press [:,9] to select the file.
The display changes in the following order:
M S
4 Within 10 seconds, press [ERASE].
The selected file is erased.
Note .
Fast
≥Locked files will not be erased (see below).
≥Total recording time can be reduced after erasing a number of files. Remedy this by
FAST
erasing all the folders occasionally.
≥Erased files cannot be recalled.
∫ Locking files
1 Press [ $ FOLDER / % MENU] to select the folder.
2 Press and hold [ $ FOLDER / % MENU].
3 Within 10 seconds, press [:,9] to select the file.
4 Within 10 seconds, press [1].
#
To unlock:
1 Select the locked file.
2 Repeat steps 2 and 4 for each file.
∫ Moving files
1 Press and hold [ $ FOLDER / % MENU] during play.
2 Press [ $ FOLDER / % MENU]
to select the folder you want
to move the file to.
3 Within 10 seconds, press [1].
FOLDER/
MENU
ERASE
B
The last file
The first file
ERASE
A B
C D
All folders
Present folder
New folder
Number of files
in new folder
7
ERASE
ERASE
B
ERASE
B
ERASE
B
All files
LOCK
B
A
C
RQT6222