Program Buttons - Follett 7100 Manual

Getting Started with the Follett 7100

Program Buttons

Buttons can be programmed to execute different functions using the Program Button program in the
Control Panel. The following buttons on the 7100 are programmed for the listed function.
Press and hold the Function (FUNC) key and press the appropriate function key to execute the
indicated function.
Wireless radios(wireless communication)
Follett 7100s have a 2.4 GHz 802.11b/g WLAN (Wireless Local Area Network) radio that uses Direct
Sequence Spread Spectrum (DSSS) technology. The radio is interoperable with other 802.11b/g, Wi-
Fi compliant products including access points (APs), workstations via PC card adapters, and other
wireless portable devices.
By default, the 802.11b/g radio is enabled after each hard reset, which means that the radio begins
transmitting a signal as soon as the terminal finishes booting up. The next step is to configure the
connection parameters of the radio to connect to a wireless network.
Once you configure the 7100 for your network, you can communicate wirelessly:

If you are a Destiny customer, you can communicate directly with Destiny.

If you are a Circulation Plus/Catalog Plus or InfoCentre customer, you can connect to the
Internet.
Establishing the 7100 on a wireless network depends heavily on your network infrastructure.
Successful connection depends on your network infrastructure. You will need specific information
from your network administrator.
10919A Rev11 08-11-A Copyright 2011 Follett Software Company Page 9 of 19