Connecting The Usb Cable - Follett 7100 Manual

Getting Started with the Follett 7100
Connection Options
115200@Desktop
Infrared Port
USB
3. Double-tap OK to close PC Connection, and tap OK again to close PC Connection Properties.

Connecting the USB cable

Connect the USB cable to the I/O connector on the 7100 and to a USB port on the workstation.
This is a communication-only cable unless you plug the power cable into the power port.
Connecting the power cable
The Power Port on the back end of the USB connector fits the power cable that comes with each
Follett 7100. To charge the device while communicating, connect the power cable to the Power Port.
10919A Rev11 08-11-A
Select an option to ...
Establish an RS-232 connection.
Establish an ActiveSync connection via the IrDA Port.
Establish a USB connection
Copyright 2011 Follett Software Company Page 15 of 19