Mazda MX-30 2020 Owner's Manual page 311

When Driving
i-ACTIVSENSE
▼ Intelligent Speed Assistance (ISA) Display
The setting status of the ISA is displayed in the active driving display or the display in
the instrument cluster.
Indication on
multi-informa-
Status tion display/
active driving
Stand-by dis-
play
Setting display
Cancel display
Warning display
▼ Activation/Deactivation
NOTE
When the power switch is switched
off, the system status before it was
turned off is maintained.
For example, if the power switch is
switched off while the ISA is operating,
the system will be operable when the
power switch is switched ON the next
time.
4-144
display
Displays when the speed limiter switch is operated and the system
is turned on.
Turns off when the system is turned off.
Displays when any of the following operations is done and the
speed is set.
SET- or SET+ switch is operated.
RES switch is operated (while the ISA set indication is displayed.)
Displays when any of the following operations is done and the sys-
tem is temporarily cancelled.
CANCEL switch is operated
Accelerator pedal is depressed fully
Any door is opened
The driver's seat belt is unfastened
If the vehicle speed exceeds the set speed by about 5 km/h (3
mph) or more, the ISA display flashes.
The display flashes until the vehicle speed decreases to the set
speed or less.
A warning beep is activated at the same time as the warning dis-
play.
Refer to Speed Limiter Warning Beep on page 7-53.
Explanation
Activation
Press the LIM switch to activation the
system. The ISA screen is displayed,
and the ISA standby indication displays
in white.
Deactivation
Press the LIM switch again to
deactivation the system. The ISA screen
is no longer displayed and the ISA
indication does not display.